electromagnetic glue flow meter

Specifications electromagnetic glue Flow Meter(CE Approved)

1.Medium,water,milk,juice,beverage

2.Diameter size:DN10~3000mm

3.Pulse,4-20mA

  Packaging & Shipping      

Packaging Detail:	wooden case with poly foam inside
Delivery Detail:	Send it by DHL,TNT,FedEx UPS EMS

  Product Description .
                                                electromagnetic glue flow meter      

PTFE lined pipe	10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600
Rubber lined pipe	40, 50, 65, 80, 100, 125, 150, 200, 300, 350, 400, 500, 600, 800, 1000, 1200, note: special specifications can be customized
Flow direction	positive and negative, net flows Turndown
Measuring range ratio	150:1
Repeatability error	+/-0.1%
Accuracy	piped: 0.5 class, 1.0 class
Measured medium temperature	Common rubber lining: -20~+60 ° c
	High temperature rubber lining: -20~+90 ° c
	PTFE lining: -30~+100 ° c
	High temperature vinyl lining: -30~+180 ° c
Rated working pressure	pipeline: DN10~DN65: ≤ 2.5MPa;DN80~DN150: ≤ 1.6MPa; DN200~DN1200: ≤ 1.0MPa
Flow measuring range	flow measuring range corresponding to flow rate range is 0.3~15m/s
Measured fluid conductivity	5μs/cm (Most with water as the composition of the medium, its conductivity in the range 200~800 Mu s/cm, optional solenoid flow)
Output	current :4~20mADC (isolation), pulse frequency 0~1kHz, OCT photoelectric isolation, external power ≤ 35VDC, breakover, collector Max 25mA
Load resistance	< 600 Ω
Electrode material	316L, titanium (Ti), tantalum (Ta), Hastelloy, (h), Platinum (Pt) or other special electrode materials
Protection grade	standard: IP65; IP68
Working power supply	85~265VAC 45~63HZ
Straight pipe length	pipe: ≥ 5DN in the upper reaches, downstream of greater than or equal to 2DN
Connections	flow meter connected to the piping is used between flanges, flange connection dimensions comply with GB9119-88 requirements.
Explosion-proof mark	mdllBT4
environment temperature	-25 ° c ~=60 ° c
Relative humidity	5%~95%
Total power consumption	<20W

Product details Process Package     Our Services
After-sales service:           We promise to deliver the following after-sales service:           1. Warranty: The warranty period is 12 months starting from the shipping date;          2. Customers will enjoy free repair services for failures found within the warranty due to manufacturing quality;     FAQ What are Flowmeters?
A flowmeter is an instrument used to measure linear, nonlinear, mass or volumetric flow rate of a liquid or a gas.

Selecting a Flow Meter
The basis of good flowmeter selection is a clear understanding of the requirements of the particular application. Therefore, time should be invested in fully evaluating the nature of the process fluid and of the overall installation.

Here are some key questions which need to answered before selecting a flowmeter: What is the fluid being measured by the flowmeter or flowmeters (air,water,etc…)? Do you require rate measurement and/or totalization from the flow meter? If the liquid is not water, what viscosity is the liquid? Is the fluid clean? Do you require a local display on the flow meter or do you need an electronic signal output? What is the minimum and maximum flowrate for the flow meter? What is the minimum and maximum process pressure? What is the minimum and maximum process temperature? Is the fluid chemically compatible with the flowmeter wetted parts? If this is a process application, what is the size of the pipe?      WELCOME TO Dalian Metery Technology Co.,LTD  

Contact us if you need more details on Electromagnetic Glue Flow Meter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Electromagnetic Glue Flowmeter、Electromagnetic Glue Flow Meters. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Electromagnetic Flow Meter > Food Grade Electromagnetic Flowmeter