Stainless steel chemical acid flowmeter

Specifications 1.Stainless steel chemical acid flowmeter

2.Power consumption:<13W

3.Protection class:IP6

4.CE/ISO/TUV/BQC

1. Stainless steel chemical acid flowmeter 2.Power consumption:<13W
3.Protection class:IP6
4.CE/ISO/TUV/BQC approved   Packaging & Shipping  

Packaging Detail:	Export standard packing according to buyer's requirements for Stainless steel chemical acid flowmeter
Delivery Detail:	one week after received L/C at sight or T/T for Stainless steel chemical acid flowmeter

                                                           Stainless steel chemical acid flowmeter Product Description

Parameter of vortex flow meter
Measured Mediums	liquids, gases and steams (NOTE: the mediums should be unidirectional or can be seen as unidirectional.)
	When the dryness of saturated steams ≥85%, they can be seen as unidirectional.
Temperature of Mediums	- 40°C ~ + 350°C
Pressure of Mediums	1.6MPa, 2.5MPa, 4.0 MPa
	For over 4.0 MPa, please contact us freely, for it needs special customization.
Accuracy	1.0; 1.5
Span Rate	1:8 ~ 1:30(compared with the standard atmospheric pressure)
	1:8 ~ 1:40 ( compared with the nominal temperature water)
Flow Range	Liquids: 0.4 ~ 7.0 m/s
	Gases: 4.0 ~ 60.0 m/s
	Steams: 5.0 ~ 70.0 m/s
Nominal Diameter	DN 25, 40, 50, 65, 80, 100, 125, 150, 200, 250,300 mm
Materials	1Cr18Ni9Ti
Reynolds No.	Normally, 2*104 ~ 7*106
Resistance Coefficient	Cd ≤ 2.6
Licensed Vibration Acceleration	LUGB type ≤ 0.2g
Class of Protection	IP65
Class of Explosion-Proof	Intrinsically Safe Explosion-Proof: Exia II CT2 ~ CT6
	Explosion Suppression: Exid II CT4
Conditions of Surroundings	Temperature of Surroundings:		Non-Explosion Proof Surroundings: -40°C~ +55°C
			Explosion-Proof Surroundings: -20°C~ +55°C
	Relative Humidity:			≤ 85%
	Atmospheric Pressure:			86 ~ 106 kPa
Power Supply	Non-Explosion Proof Type	Pulse type:			+12 VDC ( the output current is 4 ~ 20mA)
		Current type:			+24 VDC ( the output current is 4~ 20mA)
	Explosion-Proof Type	Current type:			+24 VDC ( the output current is 4~20mA)
Output Signal	Frequency pulse signal 2~3000Hz, low level voltage ≤1V, high level voltage ≥ 6V
	Two-wire system 4 ~ 20mA signal (isolation output), load ≤ 500Ω.

 

Measure range of Vortex Flow Meter
Diameter (mm)	Water	Gases in the Normal Temperature and Pressure
	Range of Standard Measurement (m3/h)	Range of Standard Measurement (m3/h)
25	2 ~ 16	8~60
32	1.5~15	14~100
40	3~30	18~180
50	4~40	30~300
65	6~60	50~500
80	13~130	70~700
100	20~200	100~1000
125	36~360	150~1500
150	50~500	200~2000
200	100~1000	400~4000
250	150~1500	600~6000
300	200~2000	1000~10000

    Our Services        Stainless steel chemical acid flowmeter    
           1. For on-site services not arising from manufacturing quality, we shall charge a certain service fee at our discretion based on actual charges incurred such as travel expense;          2. We provide paid repair services for meter damages not arising from manufacturing quality issues or meter damages not within the scope of warranty.   FAQ      Stainless steel chemical acid flowmeter What are Flowmeters?
A flowmeter is an instrument used to measure linear, nonlinear, mass or volumetric flow rate of a liquid or a gas.

Selecting a Flow Meter
The basis of good flowmeter selection is a clear understanding of the requirements of the particular application. Therefore, time should be invested in fully evaluating the nature of the process fluid and of the overall installation.

Here are some key questions which need to answered before selecting a flowmeter: What is the fluid being measured by the flowmeter or flowmeters (air,water,etc…)? Do you require rate measurement and/or totalization from the flow meter? If the liquid is not water, what viscosity is the liquid? Is the fluid clean? Do you require a local display on the flow meter or do you need an electronic signal output? What is the minimum and maximum flowrate for the flow meter? What is the minimum and maximum process pressure? What is the minimum and maximum process temperature? Is the fluid chemically compatible with the flowmeter wetted parts? If this is a process application, what is the size of the pipe?  WELCOME TO Dalian Metery Technology Co.,LTD

Contact us if you need more details on Stainless Steel Flowmeter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Chemical Flowmeter、Acid Flowmeter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Vortex Flow Meter > Liquid Vortex Flowmeter