Sewage stirring aeration laboratory blower
Basic Info
Model No.: HLSR80
Product Description
Sewage stirring aeration in hospital and laboratory.
Sewage stirring aeration in hospital and laboratory.
Features:
2. Standard mass production, sufficient inventory, short delivery time
3. Imported screw noise shielding structure, lower noise than the same production
4. Compact structure, small volume, light weight with graceful appearance
5. Oil free, no oil pollution for transportation medium
SPECIFICATIONS: HLSR Roots Blower |
Introduction:
HLSR blower is new three-lobe roots blower developed by TAIKO KIKAI( Japan), the blower flow capacity is 0.6m3/min to 300m3/min, pressure rise is from 9.8kpa to 98kpa. HLSR had more than 22 models, 200 specifications.
Advantage:
1. Japan design, long service life.
2. Small outline dimension,light weigh
3. Big flow capacity, low noise and reliable operation.
Operation Instructions:
1. The inlet temperature of the conveying medium should not be greater than 40 C.
2. The content of particles in the medium shall not exceed 100 mg / m3 and the maximum size of particles shall not exceed half of the minimum working gap.
3. Bearing temperature should not be higher than 95 and lubricating oil temperature should not be higher than 65 during operation.
4. Use pressure shall not be higher than the range of boost prescribed on the nameplate.
5. The clearance between impeller and casing, impeller and side plate, impeller and impeller of Roots blower has been adjusted when leaving the factory. The clearance should be guaranteed when reassembling.
6. When Roots blower is running, the oil level of the main tank and the auxiliary tank must be between the two red lines of the oil Level Meter.
Spare Parts Details:
Certificate:
CNC Machine Process:
Project Case:
Quality Control:
Packing&Delivery:
Product Categories : Lower Noise Roots Blower > Roots Blower For Laboratory