residue oil flowmeter/flow meter (digital target type)
Basic Info
Model No.: residue oil flowmeter
Product Description
2.Accuracy:0.2 - 1.5%
3.Repeatability:0.05%~0.08%
4.Caliber:DN65-3000mm
1.Description:residue oil flowmeter/flow meter
2.Accuracy:0.2 - 1.5%
3.Repeatability:0.05%~0.08%
4.Caliber:DN65-3000mm Packaging & Shipping
Packaging Detail: | In carton or according to custom's requirement |
Delivery Detail: | 2-3days by TNT,DHL,FedEx,UPS,EMS |
main technical indices | |||||||
Measured media | Liquid,gas,steam | ||||||
Nominal diameter | Pipeline type 15~300mm | Clamped mounting type 15~600mm | Inserted type 100~3000mm | ||||
Nominal pressure | 0~55MPa | 0~55MPa | 0~55MPa | ||||
Media temperature | -20~70oC (normal temperature type) -196~+700oC(high/low temperature type) | ||||||
Accuracy | ±0.2% | ±0.5% | ±1.0% | ±1.5% | ±2.5% | ||
Range degree | 1:10 | 1:15 | 1:30 | 1:100 (gas) | 1:15(steam) | ||
Compensation type | Temperature compensation; pressure compensation | ||||||
Repeatability | 0.1%~0.08% | ||||||
Power supply | Built-in 3.6V Li batter; external power supply of 24VDC; 220VAC (only for separate digital tube) | ||||||
Output forms | Site display reading; 4~20mA (2-wire system); pulse; 0~10V; RS232/RS485 (optional);HART PROTOCOL | ||||||
Material | Carbon steel; s.s.304; s.s.316L; also supplied to user requirement | ||||||
Explosion-proof sign | Intrinsically safe type (ExiallCT4); Explosion isolating type (ExiallBT4) | ||||||
Protection class | IP65; IP67;IP68 |
3. For on-site services not arising from manufacturing quality, we shall charge a certain service fee at our discretion based on actual charges incurred such as travel expense; 4. We provide paid repair services for meter damages not arising from manufacturing quality issues or meter damages not within the scope of warranty. FAQ What are Flowmeters?
A flowmeter is an instrument used to measure linear, nonlinear, mass or volumetric flow rate of a liquid or a gas.
Selecting a Flow Meter
The basis of good flowmeter selection is a clear understanding of the requirements of the particular application. Therefore, time should be invested in fully evaluating the nature of the process fluid and of the overall installation.
Here are some key questions which need to answered before selecting a flowmeter: What is the fluid being measured by the flowmeter or flowmeters (air,water,etc…)? Do you require rate measurement and/or totalization from the flow meter? If the liquid is not water, what viscosity is the liquid? Is the fluid clean? Do you require a local display on the flow meter or do you need an electronic signal output? What is the minimum and maximum flowrate for the flow meter? What is the minimum and maximum process pressure? What is the minimum and maximum process temperature? Is the fluid chemically compatible with the flowmeter wetted parts? If this is a process application, what is the size of the pipe? WELCOME TO Dalian Metery Technology Co.,LTD Contact us if you need more details on Residue Oil Flowmeter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Residue Oil Flow Meter、Digital Target Type Flowmeter. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Target Flow Meter
Premium Related Products