Hot water flow faucet meter with model
Basic Info
Model No.: Hot water flow faucet meter with model
Product Description
1. Accuracy: Better than 1%
2. Repeatability: 0.2%
3. Certifiacte: EMC and LVD
Hot water flow faucet meter with model
1. Accuracy: Better than 1%
2. Repeatability: 0.2%
3. Certifiacte: EMC and LVD Product Description Specifications b. Several type transducers for selection;
c. Adopt low voltage, multi-pulse technology to improve accuracy, useful life. Hot water flow faucet meter with model
Applicable medium: Water, sea water,fuel oil and other single, uniform and stable liquid which can conduct ultrasonic
§1.Charactaristic of Hot water flow faucet meter with model sundar.v.iyer 1.1 Features of Hot water flow faucet meter with model a. Linearity: 0.5%, Repeatability: 0.2%, Accuracy:±1% b. Several type transducers for selection, measuring pipe size is from DN15mm to DN6000mm c. Adopt low voltage, multi-pulse technology to improve accuracy, useful life and reliability. d. Powerful Recording Function, record the totalizer data of the last 64 days/64 monthes/5 years. 1.2 Flow measurement principle of Hot water flow faucet meter with model The transit time measured about velocity of the liquid in the pipe, show as follows: 1.3. Optional transducer of Hot water flow faucet meter with model a. TS-1 clamp-on type transducer, pipe size from DN15-100mm b. TM-1 clamp-on type transducer, pipe size from DN50-1000mm c. TL-1 clamp-on type transducer, pipe size from DN300-6000mm 1.4. Typical application of Hot water flow faucet meter with model The wall-mounting flow meter can be applied to a wide range of pipe flow measurements. Applicable liquids include pure liquids as well as liquid with small quantity of tiny particles. Examples are: a. Water (hot water, chilled water, city water, sea water, waste water, etc.); b. Sewage with small particle content; c. Oil (crude oil, lubricating oil, diesel oil, fuel oil, etc.); d. Chemicals (alcohol, acids, etc.); e. Plant effluent; f. Beverage, liquid food; g. Ultra-pure liquids; h. Solvents and other liquids 1.5. Product Identification of Hot water flow faucet meter with model Each set of the flow meter has a unique product identification number or ESN (electronic serial number) written into the software that can only be modified with a special tool by the manufacturer. In case of any hardware failure, please provide this number which is located on menu window M61 when contacting the manufacturer. 1.6. Specifications of Hot water flow faucet meter with model
Items | Specifications | |
Main unit | Accuracy | Better than ±1% |
Repeatability | Better than 0.2% | |
Principle | Transit-time measuring principle | |
Measurement Period | 500ms | |
Display | LCD with backlight, display accumulated flow/heat, instantaneous flow/heat, velocity, time etc. | |
| Output | Analogue output: 4-20mA or 0-20mA current output. Impedance 0∼1kW. Accuracy 0.1%. |
|
| OCT output: Frequency signal (1~9999HZ) |
Relay output: over 20 source signal (no signal, reverse flow etc.) | ||
|
| RS485 serial port |
| Input | Three analogue input |
Three-wire PT100 resistor input (optional) | ||
Other functions | Automatically record the totaliser data of the last 64 days / 64 months / 5 years; The power-on time and corresponding flow rate of the last 64 power on and off events. Allow manual or automatic flow loss compensation The instrument working status of the last 64 days | |
pipe | material | Steel, stainless steel, cast iron, cement pipe, copper, PVC, aluminum, FRP etc. Liner is allowed |
Size | 15-6000mm | |
Straight pipe section | In the upstream it must be beyond 10D, in the downstream it must be beyond 5D, in the upstream the length must be beyond 30D from the access of the pump. (D stands for pipe diameter) | |
Liquid | Types | Water, sea water, industrial sewage, acid & alkali liquid, alcohol, beer, all kinds of oils which can transmit ultrasonic single uniform liquid |
Temperature | Standard: -30 degree - 90 degree ,High-temperature:-30degree - 160 degree | |
Turbidity | Less than 10000ppm, with a little bubble | |
| Flow Direction | Bi-directional measuring, net flow/heat measuring |
Environment | Temperature | Main Unit: -30 degree - 80 degree |
Transducer: -40 degree -110 degree , Temperature transducer: select on enquiry | ||
Humidity | Main Unit: 85% RH | |
Transducer: water-immersible, water depth less than 3m | ||
Cable | Twisted Pair Line, standard length of 20m, can be extended to 500m (not recommended); Contact the manufacturer for longer cable requirement. RS-485 interface, transmission distance up to 1000m | |
Power Supply | AC220V or DC24V | |
Power Consumption | Less than 1.5W | |
Protocols | MODBUS, M-BUS, Fuji extended protocol and other factory protocol |
Product Categories : Ultrasonic Flow Meter > Ultrasonic Water Meter
Premium Related Products